Can DeckOver be used on concrete?

07/03/2019 Off By admin

Can DeckOver be used on concrete?

Rather than leave the raw, clean concrete, I decided to try the BEHR PREMIUM DeckOver® product. This product is really unique, in that it brings new life to old wood and concrete surfaces. It also dries four times thicker than traditional solid color stains.

Is deck over any good?

This 100% acrylic formula conceals cracks and splinters up to 1/4″, and creates a smooth, slip-resistant finish that also resists cracking and peeling. It’s available in 54 solid custom colors and is also great for decks, railings, patios, composite decks, pool decks, and walkways.

What is better than Behr DeckOver?

Deck Resurface Stains like Behr Deckover, Olympic Rescue-It, Rust-Oleum Restore – Do They Work? They claim it is the smart alternative to deck replacement. It can be applied to wood surfaces such as decks, stairs, docks, composite decking, and more.

Is DeckOver oil based?

It worked with one coat and we very happy with the results. This oil based product was recommended on a good site where I spent some time researching how to do this and what products to use.

How long does Behr Deckover need to dry before rain?

No. The surface must be clean and completely dry before coating. Avoid painting in conditions of low temperature and high humidity (or presence of moisture, condensation, dew, etc.). Do not paint if rain is expected within 24 hours.

Is Behr deck over supposed to be thick?

Not too thick I’ve used deck over since 2014 and love it. It is supposed to be thick – that is the advantage of using it.

What is good to put on a deck to prevent splinters?

When it comes to keeping a deck in top condition, it’s really a matter of two simple things: cleaning and sealing. Choose a good quality sealer, preferably one with a UV filter. Water should bead up on a well-sealed wood deck in much the same ways as it does on a waxed car finish.

Can you use a paint sprayer for Behr deck over?

Can I use an airless sprayer to apply BEHR PREMIUM ADVANCED DECKOVER Coating? Airless spray is recommended for experienced applicators only. When spraying vertical surfaces, apply a very thin coat (one pass only per coat) and do not back brush/roll.