Did they make a Dodge Dart with a Hemi?

07/09/2019 Off By admin

Did they make a Dodge Dart with a Hemi?

Before the 2018 arrival of the 9-second Dodge Challenger SRTĀ® Demon, the 1968 LO23 HEMIĀ® Dart reigned as the most extreme example of a factory-built drag racing machine in history. So when the 426 Race HEMI was installed, the power-to-weight ratio was off the charts. …

How fast was a Hemi Dart?

Dodge engineers designed the Hemi Dart to reach 130 miles per hour in under 11 seconds, and dish out quarter mile times in the high 10-second range, but many racers were able to achieve even better results almost immediately.

How much is a Hemi Dart worth?

Norm’s-delivered Super Stock Hemi Dart sells for $125,000 | Hemmings Motor News.

What is the fastest Hemi car?

2017 Charger SRT 392 The SRT 392 has a 6.4-liter Hemi V-8 engine with an eight-speed automatic transmission. This engine puts out a whopping 485 horsepower and 475 pound-feet of torque, and it can go from zero to 60 in 4.3 seconds. All of this power allows the SRT 392 to reach a top speed of 175 miles per hour.

How fast was the Dodge Daytona?

200 mph
Buddy Baker, in the No. 88 Chrysler Engineering Dodge Charger Daytona, was the first driver in NASCAR history to break the 200 mph (322 km/h) mark, on March 24, 1970, at Talladega….1969.

First generation
Wheelbase 117 in (2,972 mm)

Who was the original owner of the Hemi Dart?

Original Owner Joe Ralph Thompson ( Recently inducted into the Arkansas Hall of fame and subsequently raced by Joe Tueton) All Original Lightweight Components ( Mirror Delete, Bumper, Interior/Super Stock Seats )

How much does a Dodge Hemi Dart weigh?

The standard Dart seats were also replaced by the no-frills buckets out of the Dodge A-100 van, yielding an interior aesthetic that was decidedly all business. All put together, the Hemi Dart weighed in at a fairly scant 3,000 pounds.

What kind of gear set does a Hemi Dart have?

The Hemi Dart could be optioned with either a 727 Torqueflite automatic with a 4.86 gear set and a 2600 rpm stall converter or a three speed manual gearbox which utilized 4.88 gears, a heavy duty clutch, a Dana-built 931/44 heavy duty axle, and a requisite Hurst shifter.

What did Hurst do to the Dodge Hemi Dart?

To get even more weight out of the car, Hurst swapped out the metal fenders and hood for fiberglass pieces, acid-dipped the doors, installed thinner front and rear bumpers, and swapped out the glass windows for polymer-based ones that were secured by seat belt straps rather than the heavier traditional window cranks.