How can I get more horsepower out of my L98?
How can I get more horsepower out of my L98?
According to Myron, with these modifications you can have an L98 with about the same horsepower as a C5 for considerably less cash….You Can Spruce Up Your L98 With The Right Parts
- Tune It Up.
- Fuel Pressure.
- Porting & Air Flow.
- Computer Tuning.
- Throttle-Body Openings.
- Exhaust.
- Ingnition Module.
- Cam & Intake.
How much HP can a L98 handle?
They can handle about 800 hp and 7000 rpm in boosted applications (at least for a while).
Are L98 heads any good?
The L98 heads don’t hold up to modern cylinder head designs, but they aren’t a terrible cylinder head. Some port work and upgraded valves can make them perform solidly. Really, it depends on what motor they are going on.
Is a L98 a LS engine?
The L98 engine is a derivative of the 6.0L L76, which, itself, is a modified version of the 6.0L LS2 engine….GM 6.0 Liter V8 Small Block L98 Engine.
Displacement: | 6.0L / 364 cu. in. |
---|---|
Vehicles: | Holden Commodore |
Introduced: | 2006 model year |
Discontinued: | 2010 |
Predecessor: | LS1 / Gen 3 Small Block |
Is a L98 a LS2?
Introduced in 2006, the L98 and L76 are 6.0-litre variants of the LS2. The L76 was used in February 2006-on VZ and VE (auto only) Holden Commodores, Statesmans and Caprices (WL and WM models).
Are LS2 and L98 the same?
In stock form, the L98 produces less power than the similar LS2 engine due to the more conservative camshaft design. With equal cam profiles, the L98 outperforms the LS2 thanks to the superior head flow. These engines are what you will find in most VE Holden Commodores.
How can you tell the difference between L98 and L77?
L98 was an L76 with DOD delete. L77 was an upgraded L76 with different cam and lifters. LS2 was a Gen IV block with Gen III heads.
How much HP can stock TPI support?
The original L98 TPI induction system was designed to feed the airflow needs of a mild 350 small block (also used on the smaller 305). With a maximum power rating near 250 hp, the system was not designed with big power levels in mind.
What’s the difference between a LS1 and LS2?
The main difference between the engines in the LS family is the displacement, intake, camshaft, and various small details. The LS1 has a displacement of 5.7L, whilst the LS2 has a displacement of 6.0L. This increase in displacement makes the LS2 a little more torque than the LS1.
Is LS2 a L77?
L98/L76/L77 Introduced in 2006, the L98 and L76 are 6.0-litre variants of the LS2. The L76 was used in February 2006-on VZ and VE (auto only) Holden Commodores, Statesmans and Caprices (WL and WM models). GM also made a truck variant called the Vortec 6000, based on Holden’s L76, to replace the Gen III LQ9.
What is better L98 or LS2?