How do I fix F06 error on Whirlpool washer?
How do I fix F06 error on Whirlpool washer?
How to Fix F06 on a Whirlpool Duet
- Touch “Pause/Cancel” twice to cancel the F06 error on the display.
- Plug the power cord back in and select a new wash cycle.
- Press “Pause/Cancel” twice again if the F06 error code resumes.
What does F06 mean on a Whirlpool Duet washing machine?
drive motor tachometer error
The “F06” fault code indicates a drive motor tachometer error. This means the control is unable to properly detect motor speed and the machine will shut down. If the failure occurs during high-speed spin, the door will unlock after 3 minutes.
What does F06 mean on my washing machine?
F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.
What does E01 and F06 mean on a Whirlpool washer?
What does error code E01 F06 mean? It indicates the problem of the interaction of two boards: CCU (central module); MCU (engine control microcircuit).
How do I fix Hotpoint F06 error?
When your Hotpoint washer dryer shows error message F06, you will need to check the door area for any obstructions. Closely inspect the door lock and surrounding areas, removing anything in its way. Once you have cleared any obstructions, try to restart the machine programme.
How do I clear the error code on my whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I unlock the door on my Whirlpool Duet washer?
Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.
What does error code E01 mean on a Whirlpool washer?
LONG DRAIN TIME
Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.
What does F06 mean on a whirlpool duet?
The Whirlpool Duet washing machine is an automatic, front-loading washer with automatic sensors for temperature control, water level and wash load size, as well as an electronic control panel and keypads. Errors with the washing machine will result in an error code that appears on the electronic control panel, such as “F06.”.
Why is there an error code on my Whirlpool duet washer?
As was already said, in most cases, the E01 F06 Error code is indicated on the display of your washer in case the connection between the control unit and the motor controller has been lost. Other explanations of this error can be the failure of the motor itself or the faulty switch of the door.
What do you need to know about Whirlpool duet?
Contact a professional for service assistance instead. The Whirlpool Duet washing machine is an automatic, front-loading washer with automatic sensors for temperature control, water level and wash load size, as well as an electronic control panel and keypads.
What can cause the E01 F06 error code?
What can cause the E01 F06 Error? As was already said, in most cases, the E01 F06 Error code is indicated on the display of your washer in case the connection between the control unit and the motor controller has been lost. Other explanations of this error can be the failure of the motor itself or the faulty switch of the door.