How do you wire a British plug?
How do you wire a British plug?
The Blue (Neutral) wire (bl = bottom left) goes into the hole in the bottom left (when the three pins of the front of the plug are facing away from you). The Brown (Live) wire (br = bottom right) goes into the hole on the right, connected to the fuse (which should be clipped in).
Do plug socket wires run up or down UK?
Safety Zones for Electrical Cables in Walls There are a number of electrical wiring safe zones in which the cables should run: Vertically from any switch or socket – the safety zone runs the width of the socket or switch both up to the ceiling and down to the floor.
Can you wire a 3 pin plug with 2 wires?
An appliance that only has two wires will be double insulated. The wires should be connected to the neutral and live prongs of the plug. Make sure to connect live to live terminal and neutral to neutral terminal if the wires are color-coded.
What happens if you wire a plug wrong?
But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work but the polarity will be backward. When this happens, a lamp, for example, will have its bulb socket sleeve energized rather than the little tab inside the socket.
What happens if you wire a plug wrong UK?
This makes things like lamps and many appliances more safe to operate. But here’s the catch: If you connect the circuit wires to the wrong terminals on an outlet, the outlet will still work but the polarity will be backward. The white (neutral) wire should be connected to the silver-colored terminal.
Where do wires go in plug?
In a plug, the blue neutral wire goes to the left, the brown live wire to the right and the green and yellow striped earth wire to the top. The fuse fits next to the live wire.
Should I drill above a plug socket?
Don’t drill directly above or below light switches and plug sockets. Invest in a stud finder/metal detector (as mentioned above) that will detect wires and pipes. If you do mistakenly drill into a water pipe, think of the little boy with his thumb in the dyke and LEAVE THE DRILL BIT IN THERE.
How do I make sure I don’t drill into a wire?
“One common rule is to avoid drilling around light switches and sockets, as the electrical wires can go horizontally and vertically around these fixtures,” Williams explains. “You can also get an idea of where wires and pipes run by looking in the attic and basement to see where they go up or down through framing.”
What happens if an outlet is wired backwards?
In a correctly wired outlet, electricity will flow to the switch; with reversed polarity, it will be present in the item itself even when it is not turned on. In either case, the item will not function until the switch is flipped to close the circuit.
How to wire a plug in the UK?
How to wire a British plug in a simple pictorial guide. Learn how to correctly wire a plug to the UK standards and also how to safely strip electrical cable. Please note that this project should only be used for wiring a British electrical plug. Don’t want to do this job yourself? Let us help you find a tradesman local to you
Do you tie a knot on a plug?
The knot helps keep the wires connected to the plug even with some tension applied to the plug. If you are using a 3-conductor wire, tie the knot using only the black and white wires, ignoring the green wire. If you are using any of our rectangular or button plugs, skip this step.
Where is the fuse on a British plug?
The live electricity has to pass through the fuse before it gets into the cable leading to your appliance. If anything is wrong, the fuse blows. The neutral wire is on the left of the plug and coloured blue and the earth wire, at the top of the plug, coloured green and yellow.
Where does the blue wire go in a plug?
Undo the screws on top of the holes to allow the wires to go into the holes and get a good contact with the metal. The Blue (Neutral) wire (bl = bottom left) goes into the hole in the bottom left (when the three pins of the front of the plug are facing away from you).