How much azide do I add to PBS?

08/13/2019 Off By admin

How much azide do I add to PBS?


Reagent Amount to add Final concentration
10X PBS solution 50 mL 1X
Sodium azide 0.1 g 0.02% (w/v)
H2O to 500 mL

How do you make a sodium azide solution?

To make a 10% stock solution of sodium azide, dissolve 10 g of sodium azide in 100 ml of distilled H2O. Store at room temperature.

How much sodium azide is in a buffer?

To prevent microbial contamination, sodium azide can be added to an antibody preparation to a final concentration of 0.02% (w/v). Many of our antibodies already contain this preservative at concentrations ranging from 0.02 to 0.05%. This will be indicated on the datasheets in the storage buffer section.

Why is sodium azide used in buffer?

The sodium azide is a preservative preventing the microbial growth in the buffer. It can be excluded from the buffer without affecting the performance of the assay.

Can I freeze antibodies?

Repeated freeze/thaw cycles can denature an antibody, causing it to form aggregates that reduce the antibody’s binding capacity. Storing at -20°C should be suitable for most antibodies; there is no perceptible advantage to storing at -80°C.

How do you handle sodium azide?

Use appropriate personal protective equipment such as safety glasses, goggles, gloves, and laboratory coat when handling sodium azide. A danger of explosion could be caused by friction, heat, or shock, so it should be stored in tightly closed containers in a secured, cool, and well-ventilated area away from water.

Is sodium azide toxic to cells?

Most commercially available antibodies contain small amounts of preservatives such as sodium azide to prevent microbial growth. However, sodium azide is also toxic to mammalian cells as it inhibits cellular respiration.

Is sodium azide toxic?

Sodium azide is a rapidly acting, potentially deadly chemical that exists as an odorless white solid. When it is mixed with water or an acid, sodium azide changes rapidly to a toxic gas with a pungent (sharp) odor.

What is the purpose of sodium azide?

Sodium azide is best known as the chemical found in automobile airbags. An electrical charge triggered by automobile impact causes sodium azide to explode and convert to nitrogen gas inside the airbag. Sodium azide is used as a chemical preservative in hospitals and laboratories.

What kind of solution is PBS with azide?

PBS (Phosphate buffered saline) is a buffer solution commonly used in biological research. PBS with Azide is a water-based salt solution containing sodium chloride, sodium phosphate, potassium chloride and potassium phosphate.

When to use phosphate buffered saline ( PBS )?

Phosphate-Buffered Saline (PBS) with 0.01% sodium azide should be used for tissue stored over three (3) weeks. Storage for this time period should take place in a refrigerator (4 degrees C).

Is it safe to use sodium azide in antibodies?

When staining or treating live cells with antibodies, or if using antibodies for in vivo studies, solutions containing sodium azide should not be used; it is toxic to most organisms and blocks the cytochrome electron transport system. 2.

Which is the correct solution for PBS storage?

Following perfusion fixation and overnight in the same fixative solution (∼40ml with mild agitation), transfer tissue into Phosphate-Buffered Saline (PBS) storage buffer, which is acceptable for all stains. Na2HPO4 • 2H2O, M. wt. 178.05; 0.2M -solution contains 35.61 g/l.