What are the standard sizes of transformers?

What are the standard sizes of transformers?

Especially for commercial buildings, the most common sizes for transformers are the following:

• 3 kVA.
• 6 kVA.
• 9 kVA.
• 15 kVA.
• 30 kVA.
• 37.5 kVA.
• 45 kVA.
• 75 kVA.

How do you size a transformer?

A 120-volt motor has a load amperage of 5 amps. Multiply 120 volts times 5 amps this equals 600VA now lets multiply the 125 percent start factor. Take 600 times 1.25 this equals 720VA and most transformers are sized by a factor of 25VA or 50VA. The required transformer would be a 750VA or .

What is the meaning of a 20 MVA transformer?

For example, a typical substation transformer would be rated 69-13 kV and 20 MVA; meaning the primary or high voltage is 69 kV, the secondary or low voltage is 13 kV and the transformer has a power rating of 20 MVA or 20,000 KVA. …

Does every house have a transformer?

At each house, there is a transformer drum attached to the pole. In many suburban neighborhoods, the distribution lines are underground and there are green transformer boxes at every house or two. The transformer’s job is to reduce the 7,200 volts down to the 240 volts that makes up normal household electrical service.

How do you size a NEC transformer?

To size the transformer, it is recommended to allow 25% future growth to the circuit and then adopt the next standard transformer size up. In this example, 60 kVA of demand load shall be multiplied by a factor of 1.25, resulting in a load of 89 kVA.

What mean by MVA?

Motor vehicle accident
Motor vehicle accident, or multi-vehicle accident.

How do you convert MW to MVA?

Moreover, in power plant, power factor is 1 therefore MW is equal to MVA …… (MW = MVA x P.f).

How many houses can connect to a transformer?

For a domestic consumer, the range can be wide enough and have 50 consumers connected to a single transformer. while for industrial & commercial consumers with high load , it can be as low as 4-5 consumers.

How big is a 15 kVA single phase transformer?

Transformer sizes offered from 15 to 333 kVA single phase and 15 to 750 kVA three phase. 1 Phase 3 Phase

How to choose the best medium voltage transformer?

Below is a list of our full line of medium voltage transformer configurations we offer. First, find the primary voltage you need. Then, click on the primary voltage you need to view the full product selection of secondary voltage configurations. Transformer sizes offered from 15 to 333 kVA single phase and 15 to 750 kVA three phase.

How big of a transformer do I Need?

Transformer sizes offered from 15 to 333 kVA single phase and 15 to 750 kVA three phase.

What kind of voltage does a distribution transformer have?

DOE defines a distribution transformer as having an input of 34.5 kV or less, an output voltage of 600 volts or less, 60 Hz and 15 KVA to 2500 kVA. Transformers Exempt from Efficiency Requirements