What does F06 mean on a Hotpoint washing machine?

05/02/2020 Off By admin

What does F06 mean on a Hotpoint washing machine?

Door lock fault
F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.

How do I fix F06 error?

How to Fix F06 on a Whirlpool Duet

  1. Touch “Pause/Cancel” twice to cancel the F06 error on the display.
  2. Plug the power cord back in and select a new wash cycle.
  3. Press “Pause/Cancel” twice again if the F06 error code resumes.

What does fo6 mean?

The “F06” fault code indicates a drive motor tachometer error. This means the control is unable to properly detect motor speed and the machine will shut down.

What does F01 mean on a washing machine?

failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.

Why does my Hotpoint washing machine keep flashing?

End light flashing Indicates that the Hotpoint washing machine has reached the end of a wash programme. If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.

How do I reset my Hotpoint washing machine?

Locate the “On/Off” button. You can find the button on the left side of the control panel. Press and hold the “On/Off” button. Release the button after three seconds.

How do I fix F06 error on a Hotpoint washing machine?

When your Hotpoint washer dryer shows error message F06, you will need to check the door area for any obstructions. Closely inspect the door lock and surrounding areas, removing anything in its way. Once you have cleared any obstructions, try to restart the machine programme.

How do I fix F01 error?

The Whirlpool Duet Dryer F01 error may be able to be fixed with a simple reset of the main control. Unplug the dryer for 1 minute and plug it back in this will reset the control if the error persists after that you will need to check the dryer thermal fuse.

Why is my Hotpoint washing machine lights flashing?

Why is my Hotpoint washer error code F06?

“f06- door lock fault” But I have replaced the door interlock and the same error keeps appearing. So can it be something else, for example door itself or main function computer???

What does it mean when your Hotpoint dryer says F06?

When your Hotpoint washer dryer shows error messages F06, it usually means that there an issue with the door. But before you start googling appliance repairs, there is one thing that you can do which might solve the problem.

What’s the fault on my hot point washing machine?

Regularly getting a fault F06… Regularly getting a fault F06 on Hotpoint Washing Machine and machine locked. Have to start on new cyclegain to clear. Submitted:7 years ago.

Why do I get an error message on my Hotpoint oven?

This error message is caused by the door lock. Either the door lock is not working properly or a thermostat is not giving correct information so that the controller is addressing this error. As the oven is also displaying this on and off it is possibly a wiring or connection fault.