What is code for receptacle height?
What is code for receptacle height?
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the …
Do outdoor outlets have to be GFCI?
Any 15-amp, 20-amp, or 120-volt outdoor outlet, must have GFCI protection. There are similar outlet requirements for kitchens and bathrooms. Anywhere electricity might be used near water and/or flame, GFCI outlets are at least recommended, if not required, in order to guarantee your family’s safety.
Does an outdoor outlet have to be on its own circuit?
The National Electrical Code has no requirement for exterior residential outlets to be on their own circuit. The receptacles must be GFCI and there is requirement for a minimum number of them (and distance from pools), but that’s about it.
Is there a minimum outlet height?
American Disabilities Act Requirement. The Code of Federal Regulations 28 Part 36 (American Disabilities Act) in Section 4.27. 3 states that electrical and communications system receptacles on walls shall be mounted no less than 15″ above floor.
What is the maximum height of an outlet?
between 48 and 54 inches
The maximum height for receptacles and/or switches is between 48 and 54 inches, depending on the conditions, see Section 4.2. 5 and 4.2. 6 of the ADA.
What height do you run electrical wire?
Most outlets are 16 to 18″ above the floor and I usually run, drill, my cable about 6″ above the top of the boxes.
What is the standard height of a wall switch?
48 inches
So what height do light switches have to be in a home? For a majority of rooms, builders tend to place the bottoms of light switches 48 inches above the floor. This is a comfortable height for most home dwellers when sitting or standing, plus it makes it easier to install switches during construction.