What is DLO cable used for?
What is DLO cable used for?
Diesel Locomotives use diesel engines to drive generators to power electric motors that turn the wheels, DLO cable is used to transmit the power from the generator to the electric drive motor. It is available from 14 AWG to 1111 KCMIL.
Can DLO cable be used in conduit?
The voltage rating for DLO cable is 2000 volts. DLO cable is suitable for use in conduit, ducts, troughs and electrical tray. It can be used in wet or dry areas. The maximum continuous conductor temperature for normal operations is 90°C in dry locations and 75°C for wet locations.
What does the O stand for in DLO cable?
DLO Cable stands for “Diesel locomotive cables”or DLO Wire. Back then, these heavy duty 1kV and 2KV Diesel Locomotive cables were used as power-leads in traction motors. The DLO Cables were were used as open wiring to the Diesel Electric motors where they were made to take a massive amount of wear and tear.
What is the difference between welding cable and DLO cable?
While both DLO and Welding Cable use a stranded copper conductor, welding cable is a bare copper while DLO has a tin coating. This tin coating is highly resistant to corrosion helping DLO fair better in outside environments over a longer period. Welding cable is rated at 600 volts while DLO cable is 2KV or 2000 volts.
What is Type P Cable?
Type P Rig Cables are specifically designed for installation and use in harsh environments found within offshore and onshore drilling rigs. These extreme environments may include severe cold, high heat, constant vibration, drilling mud, mechanical stress, and salt corrosion.
What is RHH RHW wire?
RHW wires are an underground service entrance cable for direct burial in which the conductor temperature will not exceed 90 degrees Celsius wet or dry. RHW-2/USE-2 and RHH cables have a voltage rating of 600 volts and are high-heat, moisture, and sunlight resistant.
What is Type P cable?
What is Type W Cable?
Type W cable is a durable portable cord capable of supplying power in temporary or permanent wiring applications. Multi-conductor Type W cables are ideal for temporary power supply applications.
What is Type P Cable made of?
tinned copper conductors
Cable A factory assembly of one or more insulated flexible tinned copper conductors, with associated equipment grounding conductor(s), with or without a braided metallic armor and with an overall nonmetallic jacket.
Is Rhh wire direct burial?
RHW wires are an underground service entrance cable for direct burial in which the conductor temperature will not exceed 90 degrees Celsius wet or dry.
Is Type W cable waterproof?
Single conductor Type W cable is designed to weather well in extreme environmental conditions thanks to its CPE jacket, which is sunlight and water-resistant.
What can a DLO cable be used for?
DLO cable is recommended as a portable cable for drilling rigs, on-shore and off- shore applications, railroad and transit car wiring, and electric earth-moving equipment. It also extremely well-suited for other applications like shipyards, power and control jumper cables, motor leads, and sometimes as a telecom power supply.
What should the temperature of DLO cable be?
DLO cable is suitable for use in conduit, ducts, troughs and electrical tray. It can be used in wet or dry areas. The maximum continuous conductor temperature for normal operations is 90°C in dry locations and 75°C for wet locations.
What kind of conductor is Southwire DLO cable?
Southwire’s Heavy-Duty Flexible Power Cable – DLO (HDFPC-DLO) – is manufactured with Flexible Stranded Rope-Lay, Class I Tinned Copper conductor, with a Thermoset Ethylene Propylene Diene Monomer (EPDM) insulation and Thermoset Chlorinated Polyethylene
What does DLO stand for in railroading?
DLO Cable stands for “Diesel locomotive cables”or DLO Wire. DLO Cable was originally developed for wiring diesel-electric locomotive trains dating back before the 1920’s, over 100 years ago. Back then, these heavy duty 1kV and 2KV Diesel Locomotive cables were used as power-leads in traction motors.