What kind of differential fluid do I need for a Jeep Wrangler?
What kind of differential fluid do I need for a Jeep Wrangler?
There are two types of differential oils that are suitable for Jeep vehicles, namely Royal Purple, Pennzoil, Valvoline and Amsoil. The Jeep forum states that you can use Royal Purple 90 for the front differential and 140 for the rear.
When should I change differential fluid Jeep Wrangler?
Following “Schedule B” in the Jeep owner’s manual (heavy driving), you should change your differential fluids every 15,000 miles. However it is always a good idea to do this IF you’ve submerged your axles in deep water for prolonged periods of time.
How much does it cost to change differential fluid?
You’ll only pay somewhere between $80 and $140 for differential fluid change. The labor should be between $50 and $70, while parts can cost anywhere from $30 to $70.
What is the thickest gear oil?
The SAE grading system indicates oil viscosity in simple numbers ranging from the thin oil (10) to the very thick oil (140 or above). Heavier weight, or higher grade oil is more viscous and therefore thicker as it flows between the gears. Light grade oil is ideal for small, fast, polished gears under a light load.
What kind of differential oil does a Jeep Wrangler use?
This is according to the Jeep Wrangler maintenance schedule. There are two types of differential oils that are suitable for Jeep vehicles, namely Royal Purple, Pennzoil, Valvoline and Amsoil. The Jeep forum states that you can use Royal Purple 90 for the front differential and 140 for the rear.
How often do you change the differential fluid on a Jeep Wrangler?
On the Jeep forum, it states that TJ front and rear differential fluid should be changed every 12,000 miles for heavy driving (off-road). But for standard driving, you can change the differential fluid every 24,000 miles for the front and rear differentials. Jeep Wrangler fluid Change Intervals
What is the fluid capacity of a Jeep Wrangler?
Jeep Wrangler JK Differential Fluid Capacity. Axle: Dana 30 Axle. Capacity: 2.1 Pints / 1 Liter. Fluid Type (ALL LISTED JK AXLES): 80w-90 or 75w-140 If towing Axles w/ Trac-lok differential must add 3.4 oz. of limited slip additiv. Axle: Dana 35 Axle. Capacity: 3.5 Pints / 1.7 Liters.
Why do I need oil fluid in my Jeep Wrangler?
Fluid ensures that all the parts are in healthy working condition so your gears don’t stick when you’re driving. If the oil runs low or becomes contaminated it can cause the gears to make squeaking or whining noises as you turn and it can cause damage to other parts of your Jeep.