# What lengths does 3×2 come in?

## What lengths does 3×2 come in?

Treated Timber 3×2 | 75mm x 47mm

• 1.8 meter (6ft)
• 1.2 meter (4ft)
• 2.4 meter (8ft)
• 3 meter (10ft)
• 3.6 meter (12ft)
• 4.2 meter (14ft)

What size wood is 3×2?

47mm x 75mm
3×2 Timber | 47mm x 75mm Timber | Builder Depot.

How many 3×2 CLS in a pack?

10 Pieces
CLS Stud Timber 40mm x 65mm x 2400mm (3×2) – Pack of 10 Pieces.

### What is the difference between C16 and C24 timber?

C24 timber has been graded to a higher standard than C16. It’s a premium piece of timber that can handle higher loads and wider spans. C24 grade can only be achieved by importing timber from areas where the climate forces a slower growth rate and hence a tighter grain.

How much is a length of 2×4?

Now, most timber is milled and planed to give it a little more of a finished look, and a little more of a consistent size and profile. Because of this extra milling, a 2×4 no longer measures a full 2 inches by four inches. Instead, a 2×4 is really only 1 1/2″ by 3 1/2″.

What size is 2×2 timber?

Nominal vs. Actual Measurements of Dimension Lumber

Nominal Size Actual Size
2 x 2 1 1/2 x 1 1/2 inches (38 x 38 mm)
2 x 3 1 1/2 x 2 1/2 inches (38 x 64 mm)
2 x 4 1 1/2 x 3 1/2 inches (38 x 89 mm)
2 x 6 1 1/2 x 5 1/2 inches (38 x 140 mm)

#### What is a 4 by 2 wood?

In the past, when a timber was called a 2×4 [or “two-by-four”], it actually measured 2 inches by 4 inches. Now, most timber is milled and planed to give it a little more of a finished look, and a little more of a consistent size and profile.

What does CLS mean in timber?

CLS Timber – “Canadian Lumber Size” or CLS is finished on all sides giving a smaller cross-section than traditional sawn timber. Originating in the Canadian market, hence the name it is mainly used for timber frame home construction and for internal and partition walls.

What size is CLS timber?

CLS Timber (derived from Canadian Lumber Size), though used for the same application as a Scant, has a smaller radius on each of the four corners, making it both thinner and narrower. The finished size of a 50 x 75mm piece of CLS timber is 38 x 63mm.

## How strong is C24 timber?

C16 and C24 are the most common used softwood timbers within the UK….Grading Timber – Properties & Strengths.

Strength & Properties Class C16 C24
Compression perpendicular to grain (N/mm2) 2.2-1.7 2.4-1.9

How big is a 3×2 piece of timber?

3×2 Timber | 47mm x 75mm Timber | Builder Depot.

How big is a 2 in 3 Whitewood stud?

The 2 in. x 3 in. x 120 in. Premium Kiln-Dried Whitewood Stud is out of stock and does not have an ETA. Please check back with the Home Depot website for this item.