What pressure should I set my HVLP spray gun at?

05/08/2019 Off By admin

What pressure should I set my HVLP spray gun at?

We recommend painting between 25-30 psi while the trigger is pulled. You may see some paint tech sheets which refer to a painting air pressure of 8-10. Don’t set the spray gun to those as this measurement is referring to the air cap pressure right where the paint comes out.

What kind of paint do you use in HVLP?

HVLP paint sprayers work with oil-based paint, but thicker paints such as water-based latex can clog the sprayer. Combine a half cup of water for every gallon of latex paint in a bucket and stir thoroughly to thin its consistency before using latex paint an HVLP gun.

Can you spray primer with a 1.4 tip?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle. Sealers and single-stage urethanes should be sprayed with 1.4 to 1.6 nozzles.

Is airless or HVLP better?

Vertical spraying: An HVLP is better for vertical spraying small projects than an airless, especially if you’re new to spraying. You’re far less likely to get paint runs because you’re spraying at a much lower pressure. An airless cranked up to 2,000 PSI throws a lot of paint onto the surface quickly.

Can you spray latex paint with a HVLP gun?

HVLP systems are not designed to spray heavier bodied latex paint. The pressurized cup allows the paint to be pushed to the fluid nozzle because of the added pressure behind the paint. If you look at most professional airless paint sprayers designed for latex paint, they are actually pumps, and use no air.

Do you need to thin paint for HVLP?

They’re extremely viscous, so whenever you spray them with a handheld, HVLP, or small airless sprayer, you need to thin them down. That’s true when you’re using anything other than a big airless unit. If you’re using a handheld or HVLP system to paint, you’re probably going to have to use as much as 20-30% water.

Can you spray latex paint with an HVLP sprayer?

Is it better to spray paint vertical or horizontal?

The vertical airless spraying method is very useful for spraying long walls or odd shaped surfaces, while the horizontal method is best for siding. Try both methods and see which one works best for your situation. One key point is always spray in a straight line.

Can you paint a car with a HVLP sprayer?

Not only do HVLP guns do a better job of not spraying excess paint onto the surface of a car, but they also have better “transfer efficiency.” This term refers to the amount of paint that is shot out of the gun and that then sticks to the surface of the car.